BS ISO 20530-1 pdf free download
BS ISO 20530-1-2020 pdf free download.Intelligent transport systems一Information for emergency service support via personal ITS station Part 1: General requirements and technical definition.
This document defines the use cases and general requirements for supporting emergency services via P-ITS-S. Any automotive-related service providers can refer to this document for developing eCall service systems into eCall non-supportive vehicles.
The P-ITS-S acts as a monitoring and data transmitting device which gathers a vehicle’s speed, impact and airbag deployment signal to assess the accident occurrence and type of accident. Once gathered data has been determined as an accident, accident related information is sent to an emergency service centre.
Only notable events, such as an airbag-deployed event, rollover and stationary accident, are concerned by this document. In addition, the vehicle data gathering device requirement and implementation methodology for the emergency service are not applicable to this document.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 13185-2. Intelligent transport systems — Vehicle interface for provisioning and support of ITS services — Part 2: Unified gateway protocol (UGP) requirements and specification for vehicle ITS station gateway (V-ITS-SG) interface
ISO 131853. lntelligent transport systems — Vehicle interface for provisioning and support of iTS Services — Part 3: Unified vehicle interface protocol (U VIP) server and client APi specification
ISO 21217. Intelligent transport systems — Communications access for land mobiles (CALM) — Architecture
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 13185-2. ISO 13185-3.
150 21217 and the following apply.
ISO and EEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at http://www.electropedia.org/
3.1 accident determination
judgement of whether an event is a real accident or not, following an analysis based on gathered data
4 Abbreviated terms
ECU electronic control unit
UVIP unified vehicle interface protocol
ITS intelligent transport system
5 General information
This document specifies the general requirements for the accident detection system via P-ITS-S. It contains information on the following:
— accident detection system structure;
— requirements for impact detection;
— accident determination process by accident case (airbag deployed/rollover/stationaryj.
The accident detection system consists of the UVIP server, which is a part of an in-vehicle system and a P-ITS-S. The role of a P-ITS-S is to gather accident data from the UVIP server, to analyse this data, and send the location of the accident detected to the emergency service centre.
The accident detection system implementation method differs according to G-sensor availability within a vehicle. Whether there is an in-vehicle or P-ITS-S G-sensor, impact data is gathered and sent to the P-ITS-S for the further accident determination process.
The accident determination process differs according to the accident case (e.g. airbag-deployed, rollover and stationary) as well as the required data. Required data is covered in use case cluster 2. Figure 1 shows the accident detection reference system.BS ISO 20530-1 pdf download.
