BS EN 3155-004 pdf free download

BS EN 3155-004-2019 pdf free download.Aerospace series – Electrical contacts used in elements of connection Part 004: Contacts, eletrical, male, type A, crimp, class T – Product standard.
BS EN 3155-004 specifies the required characteristics tests and tooling applicable to male
electrical contacts 004, type A. crimp, class T, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3 155-001.
The associated female contacts are defined in EN 3155-005.
The contacts defined by this standard are not applicable for connector EN 2997 classes KV, SV, KF and SF (defined in EN 2997-002).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard EN 2591 (all part), Aerospace series — Elements of electrical and opti cal connection — Test methods
EN 2997-001,Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures – 65 °C to .175 °C continuous, 200 °C continuous, 260 °C peak — Part 001: Technical specification
EN 2997-002. Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures — 65 °C to 175 °C contInuous, 200 °C contInuous, 260 °C peak — Part 002: Specification of performance and contact arrangements
EN 3155-001. Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical specification
EN 3155-002. Aerospace series — Electrical contacts used in elements of connection — Part 002: List and utilization of contacts
EN 3155-005,Aerospace series — Electrical contacts used in elements of connection — Part 005: Contacts, electrical, female, type A. crimp, class T — Product standard
EN 4434, Aerospace series — Copper or copper alloy lightweight conductors for electrical cables — Product standard (Normal and tight tolerances)
SAE AS 22520, Crimping tools, wire termination, general specification for 1)
SAE AS 81969/14, installing and removal tools, connector electrical contact:, type 1!!, class 2, composition B 1)
SAE AS 8 1969/30, installing and removal tools, connector electrical contact, type ii, class 2, composition C for unwired contacts 1)
ISO 8843, Crimp-removable contacts for electrical connectors — Identification system 2)
1) Published by: DoD National (US) Mu. Department of Defense http://www.defenselink.mil/
2) Published by: ISO International Organization for Standardization http://wwwisodij
BS EN 3155-004:20 19
EN 3155-004:2019 (E)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 3155-001 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.clectropcdia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 Required characteristics
4.1 Specific characteristics
Type A contacts are for general application and class T corresponds to an operating temperature range from — 65 °C to 260 °C.
4.2 Dimensions and mass
See Figures 1 and 2 and Table 1.
Dimensions and tolerances are given in millimetres and apply after surface treatment.BS EN 3155-004 pdf download.