BS EN ISO 9202 pdf free download

BS EN ISO 9202-2019 pdf free download.Jewellery and precious metals – Fineness of precious metal alloys.
This document specifies a range of fineness of precious metal alloys (excluding solders) recommended for use in the field of jewellery.
NOTE There is a possibility that national legal requirements for the designation, marking, and stamping of finished articles exist in the respective countries.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their contentconstitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 11210, Jewellery — Determination of platinum in platinum jewellery alloys — Gravimetric method after precipitation of diammonium hexachloroplatinate
ISO 11426, Jewellery — Determination of gold in gold jewellery alloys — Cupellation method (fire assay)
ISO 11427, Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using potassium bromide
ISO 11490, Jewellery — Determination of palladium in palladium jewellery alloys — Gravimetric determination with dimethylglyoxime
ISO 11494, Jewellery and precious metals — Determination of platinum in platinum alloys — ICP-OES method using an internal standard element
ISO 11495, Jewellery and precious metals — Determination of palladium in palladium alloys — ICP-OES method using an internal standard element
ISO 13756, Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using sodium chloride or potassium chloride
ISO 15093, Jewellery — Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys — Difference method using ICP-OES
ISO 15096, Jewellery — Determination of silver in 999 0/00 silver jewellery alloys — Difference method using ICP-OES
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at http://www.electropedia.org/
3.1 fineness
minimum content of the named precious metal, measured in terms of parts per thousand (‰) by weight of alloy
4 Analytical methods for determining fineness
For determining the fineness of precious metal alloys, one of the following test methods shall be used:
ISO 11210, ISO 11426, ISO 11427, ISO 11490, ISO 11494, ISO 11495, ISO 13756, ISO 15093, or ISO 15096.
The recommended methods are listed in Table 1.
5 Range of fineness
The fineness is stated as minimum value: no minus tolerance is allowed. Values are given in parts per thousand (‰).BS EN ISO 9202 pdf download.